Slot
Draw obround (stadium) shapes
Overview
The Slot tool creates obround shapes — rectangles with semicircular ends. These are commonly used for adjustment slots and elongated holes.
Parameters
| Parameter | Description | Default |
|---|---|---|
| Length | The overall length of the slot | 1.0 in |
| Width | The width (diameter of the rounded ends) | 0.5 in |
| Operation | How to combine with existing geometry | Add |
How to Use
1
Select the Slot tool
Click Slot in the sketch toolbar.
2
Enter dimensions
Set the length and width.
3
Position the slot
Click on the sketch plane to place the center.
4
Rotate if needed
Adjust orientation as needed.
Natural Language Alternatives
Instead of using the tool, you can type these commands:
Draw a slot 1 inch long, 0.25 inches wideCreate an adjustment slot 2 x 0.5 inches
Tips
- Width is the diameter of the rounded ends
- Slots allow for positional adjustment in assemblies
- Extrude as a cut to create slotted holes